Applications

EnviroOrange has identified 13 Markets in which our natural multi-purpose cleaner excels in performance and cost savings. These current Markets offer great opportunity to existing and future distribution channels and their clients. Each Market offers both Household and Industrial uses.

Everyday, we hear from our customers of new uses for EnviroOrange – which opens up new Market opportunities. The currently identified Markets are:

Use EnviroOrange for all of your cleaning needs, from home use to industrial applications. It can be used in many ways. In solution, it can be applied with a spray bottle, while in other applications it can be used in dipping tanks. EnviroOrange’s lifting agent, a blend of d-Limonene and sodium metasilicate, gets into the pores of a material to lift and remove anything which is not permanently bonded. Some stains contain permanent dyes which may or may not be removable (such as some juice stains or permanent marker).

EnviroOrange is of the highest quality and can reduce your business and household expenses 50% or more over annual maintenance costs. Although there are thousands of other products in the marketplace, only EnviroOrange has formulated a product that can be so versatile and economical to
use.

Whether the job is carpets, carbon build-up, rust, grease, glass or paint oxidation, EnviroOrange is on the top in every application. So why use fifty different products when EnviroOrange can accomplish the problem economically and effectively?

The following list can be incorporated into both the Household or Industrial environments where applicable:

Use a 10:1 dilution for all heavy duty bathroom and shower cleaning. To clean shower tiles, leave on for 10 to 15 minutes. Use a non-abrasive scouring pad to help take off heavy mildew or soap scum. A clean dry bath towel should be used to buff surfaces dry. A light protective coat is left on tiles to help sheen water off.

Add a capful to a large glass of hot water and let your rings, necklaces, chains, bracelets and waterproof watches soak for 10 to 15 minutes. Stir occasionally. Buff your jewellery dry with a clean, dry towel.

EnviroOrange can replace virtually all general purpose cleaning products. Use a 30:1 dilution for most applications and a 10:1 dilution for tougher jobs. EnviroOrange can be used to remove wine, grease, blood and virtually everything except dyes from carpet and upholstery. Using a 30-1 dilution (or 10-1 for heavy spotting), spray and soak the stain. Work the cleaner into the fibers by agitating the surface with a stiff brush. Rinse by pouring hot water onto the stain and dry with a towel. EnviroOrange can also be used in a carpet shampooer with incredible results. First vacuum the entire carpet, then remove all heavy stains as described above. Use a 50-1 dilution in the holding tank of the shampooer. Shampoo the entire carpet, focusing on high traffic areas. Remove excess moisture from carpet with towels or allow to air dry. Gum on Carpet: Heat a 10:1 dilution in the microwave for 45-55 seconds (careful – it will be hot!). Pour the heated product onto the gum and watch it dissolve.

EnviroOrange can be used as a pre-spray – including your white socks! It removes virtually every stain, including ring-around-the-collar, cuffs, make-up, lipstick, blood, wine and grease. Using a 30-1 solution, spray all stains, making sure the area is well saturated. Bad stains should be agitated with a stiff brush or the bottle trigger.

Use a 120:1 dilution for all your windows, mirrors and glass. (A stronger solution will streak.)
To remove scotch tape from glass, mist the area with a 10:1 dilution, then cover with a paper towel soaked with a 10:1 dilution. Remove after 20 minutes and use a clean towel to wipe off the tape and adhesive.

Glass Washing Machines: EnviroOrange is excellent for use is glass-washing equipment in restaurants, bars, lounges, hospitals, hotels, etc. Use a 20:1 mixture to replace the cleaning and rinsing chemicals. If you use a sanitizer chemical as a last step, continue to do so.

Mildew, Calcium and Hard Water: Apply a 10:1 solution to the area and leave it for 10 to 20 minutes.; Use a stiff brush or non-abrasive pad to remove the build-up.

Oven: Pre-heat your oven and then spray a 10:1 dilution onto the areas to be cleaned. After letting it sit for 15 minutes, use a non-abrasive scrub pad to help break up the built up grease. Use a towel to wipe up.

Stainless Steel: Use a 10:1 dilution to clean your stainless steel. For best results work with the grain. Use a 120:1 dilution to finish then buff with a clean, dry cloth.

Car Interiors
– 10:1 dilution: carpet, mat or upholstery stains
– 30:1 dilution: dash, doors, vinyl, leather, seat belts and door jambs
– 50:1 dilution: carpet shampooer or steam cleaner
– 120:1 dilution: glass and mirrors as well as car wash

Engine Degreaser: Spray and soak the entire engine and hoses (make sure they’re hot from driving or idling) with a 7:1 solution. Let the degreaser sit for 15 minutes then rinse off the engine and compartment with a garden hose.

Tires and Whitewalls: Spray and soak all tires with a 10:1 dilution. Use a stiff brush or sponge to scrub the tires. EnviroOrangewill remove brake dust, dead rubber, road grime and help restore your tires to their original condition.

RV’S: Recreation Vehicles can be kept in spotless condition with Enviro- Orange. Use a 10:1 dilution to remove the black streaks that run down from windows, and to remove heavy build-up.

Pressure Washers: EnviroOrange works great in all pressure washers and steam cleaners. Since it is 100% water soluble, it won’t clog nozzles and machines. Use at a 120:1 dilution. Hot water will always give better results than cold.

Shop Floors & Walls: Put 1 litre into a 20 litre pail of hot water. Stir and splash onto your floor. Use a stiff broom to work the cleaner into your floor. Rinse with water. To remove carbon or grease off shop walls, spray and soak a wall with a 10:1 dilution. Let it sit for 10 to 15 minutes. Use a broom or brush for heavy build-up.. Use a pressure washer or garden hose to rinse.

Parts Washers/Dipping Tanks: EnviroOrangereplaces varsol, carb cleaner, and other poisonous solvents which can get into your ground water. Use a 10-1 dilution; once you’ve used up your 20L pail of varsol replace with 2 of EnviroOrangeand fill with water. Does not cause rusting to parts.

Autobody Shops: Spray with a 30:1 solution to remove silicone. Use a towel to buff in a circular motion. For wax and grease removal, use a 30:1 solution in a bucket to hand wash. To remove all traces of grease, oil and dirt, use a 30:1dilution.Spray evenly, let it sit for 30 seconds then wipe clean and dry with a clean cloth. To remove paint oxidation and overspray use a 7:1 dilution. Spray a section and let it sit for 5 to 10 minutes. Use a clean, dry towel to wipe and buff in a circular motion, restoring the paint to its natural lustre.

A 10:1 dilution will remove algae, other build-up or faded paint. Spray evenly and let it sit for 10 minutes before wiping with an old bath towel. Use a 10:1 solution to clean tarps, awnings, canvas and boat covers. Spray evenly and work it in with a stiff brush. Use a garden hose or pail to rinse. Boat motors can be degreased and kept clean with a 10:1 dilution. Bilge, engines, decks, rust removal and degreasing can all be done with a 10:1 dilution and a brush. Since its biodegradable, it can be rinsed into the ocean, without affecting the environment. It can also be diluted with sea water.

Aircraft can be maintained both inside and out. Use 10:1 for heavy duty applications such as removal of glycol, carbon, grease, etc. The interior of aircraft can be maintained with 10:1, 30:1 and 120:1dilutions,
depending on the application (please refer to the dilution guide).
RVs

Use a 10:1 dilution to remove the black streaks that run down from windows and to remove heavy build-up.

Dairy farmers use it to keep their stainless steel equipment sparkling clean. Heavy machinery, vehicles and equipment can all be degreased and kept clean by EnviroOrangewithout poisoning farmland.

Tree sap or pitch can be removed from saw blades with a 10:1 dilution. Spray down the blade, giving it a few minutes to loosen up and then wipe it clean with a non-abrasive scrubbing pad. Some sawmills will soak their blades in a pail or drum solution of 30:1 dilution overnight for an easy
clean-up the next morning.

Use a 10:1 or 30:1 solution to keep equipment free of carbide and carbon filings. Spray the equipment, let it sit for a minute or two and wipe it clean.